Skip to main content

Oh crap

Specifically, bird crap.

Ever since the birth of aviation, birds have been a thorn in the sides of pilots and aircraft owners. For some reason, they just love aircraft. I mean, I can leave my car parked outside for a month, and it's unlikely a bird will do anything other than possibly decorate it a little bit. But an airplane? For some reason, birds think airplanes are just the best when it comes to setting up housekeeping.

Based on the evidence that I've had to clean off a couple of times now, some birds have decided that the tail cone of my airplane is a really cool place to be. I suspect there's a nest in there, but I'm honestly at a loss how to get it out short of disassembling the tail assembly. The last time I went up, there was a funky odor in the plane, whose source I'm assuming is what the birds have left behind in the tail of the plane. There's a vent between the cabin and the rear fuselage. Air normally passes from the cabin to the rear through that vent, and then out the ventilation exhaust on the left side of the plane.

I'm considering trying to block off the opening between the stabilator and the tail cone, but I'm afraid of trapping the birds in there and then having them die and start decomposing. Not to mention the possibility of baby birds. I've been flying a couple of times with this possible nest, but if it's constructed well enough, it very well could have survived with no damage.

At the very least, when the plane goes in for annual, we'll get it all cleaned out. But this is very annoying. After it's cleaned out, I'll definitely get some sort of barrier. Bruce's Custom Covers makes covers for that part of the plane, but mine has the spin kit installed so it would likely have to be even more custom than normal to fit over the additional structure.

At least they're not in my engine compartment. Fingers crossed they won't ever be.

Comments

  1. Had the same problem until I purchased a tail cone cover. I pulled the side inspection panels off and was able to clean everything out. If there is bird "byproducts" clean with soap and water and then corrosion treat the area. here is a pic of my clean out, https://1.bp.blogspot.com/_JD8tvb3xEXU/S8pKQ6zhdRI/AAAAAAAAEe0/grkSN0W05GI/s1600/nest+1.jpg

    ReplyDelete

Post a Comment

Popular posts from this blog

Approaching the annual

I know I haven't been posting much, but that's mainly because nothing much of note has been happening. I've been flying, but not really going anywhere in particular. The engine continues to run very well, and the plane is still solid. I was hoping to do more "destination" flying this year but, for whatever reason(s), it didn't really happen. Next year, hopefully.... On the horizon, though, is the annual inspection. It's already scheduled for mid-December, since the last annual is good to the end of that month. I've also arranged for it to be an owner-assisted annual. I'm told that every airplane owner should do this at least once and I can certainly understand why that is the case, even before I do it. I will be learning about my airplane in a way that nothing else will match and, incidentally, save some money at the same time. I'm looking forward to it. Leading up to the annual, I have been compiling a list of squawks that I want to take care ...

Thwarted

The plane is done being fixed again. Well, for the most part, but I'll get to that. The vacuum pump had indeed failed, so they replaced it. They also replaced the starboard fuel sump drain valve. Interestingly, I received an email yesterday from the shop with an invoice attached. It was for a credit to my account, which they gave me because they drained the fuel from the right tank. The invoice notes that 16 gallons were removed. The tank's capacity is almost 30 gallons, and I had filled it almost full on Sunday before my flight. So either they didn't credit me for all of the fuel in the tank, or it had continued to leak and had lost about 12 or so gallons over the course of a few days. I don't know which, but I'm not going to worry too much about it. I went out today to put some Camguard in the oil, run the engine, and possibly even go for a flight if the weather was nice enough. The grass runway and temporary taxiway are open so limited flight operations can proce...

Adding to the list

As noted in my previous post, my landing light isn't working anymore. The most likely reason is that the bulb simply burned out. It's an OG incandescent bulb. I don't know how old it is; I could probably go through the logs to see if it was ever replaced but I don't feel like it right now. I called up the shop and added this to the list of items to be addressed when they can get to it. I also inquired as to whether or not it makes sense to upgrade it to an LED bulb. As I understand it, there are LED bulbs available that are drop-in replacements. They cost a few hundred dollars, whereas a regular incancescent bulb is less than twenty. At some point in the next day or two the shop manager should be giving me a call so we can discuss the options. On an unrelated topic, I forgot to mention something in my previous post. My flight with my wife was the first time I used shot bags I purchased for ballast. With my wife and me in the front seats, and 40 gallons of fuel in the ta...